bing tracking image
Q & A Icon

Parts Needed to Install 7-Way and Brake Controller in 2017 Jeep Wrangler Unlimited with 4-Way

Question:

the conversion kit for the four to seven pin has a yellow wire coming off it that is labeled "reverse light circuit" What should I connect this to? Brake light?

0

Expert Reply:

We have a kit specifically designed for converting a 4-way like what you have installed on your 2017 Jeep Wrangler Unlimited to a 7-way and comes with everything needed to install the brake controller with the part # ETBC7. This would be the kit I would recommend you use to install the Redarc Tow Pro Elite # RED44FR that you mentioned.

The wiring kit you mentioned # 5506 is part of what comes with the ETBC7 too so you would not need that in addition to anything.

expert reply by:
0
Jameson C

Question:

We have a kit specifically designed for converting a 4-way like what you have installed on your 2017 Jeep Wrangler Unlimited to a 7-way and comes with everything needed to install the brake controller with the part # ETBC7. This would be the kit I would recommend you use to install the Redarc Tow Pro Elite # 331-EBRH-ACCV2 that you mentioned. The wiring kit you mentioned # 5506 is part of what comes with the ETBC7 too so you would not need that in addition to anything.

0

Expert Reply:

You do not need to wire that to anything. You can leave it left disconnected.

expert reply by:
0
Jameson C

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>