bing tracking image
Q & A Icon

How To Determine Correct Hanger Spacing with Single-Axle Trailer Hanger Kit for Double-Eye Springs


Hi, I recently purchased the SP-113275 springs and the APS4 mounting hardware. Can you tell me how far apart I need to weld the hangars? Or did I purchase the wrong springs for the APS4 kit? Thanks,


Expert Reply:

In regards to the Single-Axle Trailer Hanger Kit for Double-Eye Springs part # APS4, we only have measurements available for select leaf springs such as the 3-Leaf Double-Eye Spring part # SP-169275 which is for 2,000 lbs axles. If these were the springs that were being used then the hangers would need to be spaced apart 20" on center.

If you are using a different leaf spring which is the case here then you would need to mock the hangers up on the trailer with the leaf spring to find the correct location.

expert reply by:
Conner L

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>