Bolt Hole Pattern of Replacement Bolt-On Mounting Kit

Question:

What are the dimensions of the hole pattern on the “inside” of the adapter? In other words, the 4 bolt holes that you have not already provided dimensions for. I need to convert from the mounting plate on a load rite trailer picture to a standard hole pattern on a knot jack stand. The hole pattern on the mounting plate is 3 1/8” left/right and 3” up down.

asked by: Matt O

Expert Reply:

The bolt holes of the Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks # F500349 measure 3" apart on center in order to line up with the Jack Mounting Bracket # P9012-00.

I'm not sure if this will work for you or not but you can also always just replace the jack with a bolt-on option which this mounting kit is a replacement for, the Fulton Bolt-Thru Swivel Marine Jack - Bolt On # FXP15L.

Or there is the option of welding on the Jack Mounting Bracket # P9012-00 and using the weld-on Fulton jack, the Fulton Bolt-Thru Swivel Marine Jack - Weld On # FXP15W.

expert reply by: Kyle S