Step Bumper That Fits 2012 Ford Van  

We can help you with a 4-pole flat trailer wiring harness for your 2012 Ford E-350 van. All types of wiring kits are shown on the linked page. These include products for vans equipped with no factory wiring, vans with a factory 4-pole set-up and vans…

The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the T-One…

Unfortunately, we do not have a harness for your 2014 Ford E-350 that will plug into the connector in your photo. For a replacement you can hardwire in the #HM40975-11998 to install a 7-way connector. You can either cut off the connector you have and…

Some 2012 Ford E series vans will have a factory plug and some will not. If your van came with a factory trailer connector then the wiring is already there and active. But if it did not come from the factory with a trailer connector, the factory…

Hi Kaye; the DeeZee Brite-Tread Running Boards #DZ2045 measure 37.09" long.

There are no diamondstep rear bumpers that I can give you which will fit your 2004 Chevy Silverado, as they are universal bumpers for older model trucks and none are designed with your '04 Silverado in mind. What I can do, if you do not want to…

We do have some Westin bumpers that will fit a 2003 Ford E-350 but I'm not sure how well they will fit with the utility truck configuration (see attached photo of inside of bumper. Also they do have a different design than the one you have in…

We do have bumpers that are a fit for your 2006 Ford E-350, though they are replacement bumpers, as opposed to dock bumpers. These replacement bumpers do have holes for trailer hitch balls like you want, and come with a mounting kit as well. The…

Yes, it will. The etrailer Hitch item #e29AR will allow you to store a full sized spare tire beneath your 2005 Ford Ranger. This hitch is custom fit and bolts to your Ranger with included hardware.

I recommend installing our etrailer Trailer Hitch Receiver #e29AR on your 2008 Ford Ranger 4x4 with the 4.0L 6 cylinder engine. The frame mounted receiver may require the drilling of 2 additional holes as Ford did not drill these holes in every Ford…

I spoke with my contact at Curt and he stated that trailer hitch #13138 does fit the 2002 Ford Ranger Edge flare side. I have included a link to the installation details for you. If you plan on doing some towing, I recommend the etrailer Ball Mount…

It is difficult to identify what hitch fits just by looking at the holes in the frame. However, I can tell you that the Curt Trailer Hitch Receiver #13138 is confirmed to fit your 2004 Ford Ranger Edge. This is a Class III hitch with a 2"…