Thread Pitch of Studs on Trailer Hub # AKIHUB-655-6-K
Question:
Looking for the wheel stud thread pitch and size please.
asked by: Todd M
0
Expert Reply:
The trailer hub part # AKIHUB-655-6-K that you referenced uses standard 1/2 inch trailer wheel studs like the part # 165981. This is a coarse thread (UNC) with a thread pitch of 1/2 inch x 13 threads.
expert reply by:
Jameson C
0
Products Referenced in This Question
Replacement Trailer Hub Wheel Stud - Drive-In - 1/2" x 1-1/2" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-1/2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub Assemblies For A 2007 Four Winns Trailer Axle
- Q&A: 3,500 lb Timbren Axle-Less Trailer Suspension For Use With Large Tires & 6 on 5-1/2 Hub Bolt Pattern
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Q&A: Looking For Idler Hub For Mobile Home Axle With LM67048 And LM102949 Bearings
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Enclosed Trailer Side Door Frame and Trim
- Q&A: Recommended H-Channel for an Enclosed Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements