Could 4-Way to 7-Way Adapter with Reverse Alarm Fit 2020 Honda Odyssey with 4-Way  

Yes, the Curt Trailer Connector Adapter #C57102 would be the correct part for you to use to convert your 4-way to a fully functional 7-way. You would just need to run the wires of the #C57102 to those leads. If there isn't a 12 volt power lead…

You are correct. On the CURT Trailer Connector Adapter, #C57102, the white wire is ground, black is for 12 volt power, blue is for brakes, and yellow is for reverse lights. The 4-Way would then just plug into a 4-Way trailer connector on the vehicle…

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

After you plug the 4-way in from your 2006 Ford E-350 to the Curt Trailer Connector Adapter #C57102 you will need to run the rest of the wires as follows: The white wire will need to be grounded to a clean metal surface. The blue wire will go to the…

To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…

Since from what it sounds like, your Highlander doesn't have the factory tow package that includes a 7-way on the rear bumper, you'll need to do a hardwire installation. For starters, you'll need a functional 4 pole trailer wiring…

In order to install a fully functional 4- and 7-Way connector on your 2017 Subaru Outback Wagon you will need to start with a 4-Way harness if you don't already have one. For this I recommend the Tekonsha T-One Vehicle Wiring Harness #118467.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…