Kit Needed to Convert 3,500 lb Trailer Axles of 2021 Grand Design Imagine to Disc Brake
Question:
2021 GrandDesign Imagine 2500RL 3500# axles, 15” tires Would like to convert to disc brake in the next year. Is there a conversion kit?
asked by: Mark B
1
Helpful Expert Reply:
To do a Hydrastar kit on your your 2021 Grand Design Imagine 2500RL with 3,500 lb trailer axles you'd need the part # HBA16-252-82 that includes the actuator, breakaway kit, junction box, and 7-way trailer connector. Then for just the disc brake kits part # K2HR35D and you'd be set. I prefer the Hydrastar actuators as they are more reliable overall and faster reacting.
helpful expert reply by: Jameson C
1
Products Referenced in This Question
Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Similar Expert Q&A Pages
- Correct Disc Brakes for a Karavan Boat Trailer UST-5000-TB-78-10
- Correct Bearings and Grease Seals For Upgrading to 10" Hydraulic Disc Brakes
- Disc Brake Setup for 2009 Easyloader Boat Trailer
- Difference Between Kodiak Hub/Rotor Kit and Just Rotor Kit
- Can I Use K2HR35D On A 6,000 Lb Trailer Axle
- Disc Brake Kit to Fit Karavan Trailer with 3,750 lb Axles
- Dimension Of Brake Mounting Flange For 7 Inch Electric Or Hydraulic Brakes
- Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Disc Conversion Using a Kodiak Brake Kit and a Hydrastar EOA Actuator Kit
- Changing Drum Brakes to Disc Brakes on Gooseneck Trailer
- Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Replacement Kodiak Brake Kit for UFP DB-35 Brakes on Trailer
- Parts Needed To Add Hydraulic Disc Brakes To Trailer
- Recommended Parts To Convert Drum To Disc Brakes On EZLoader Trailer With 3,500 Lb Axle
- How to Convert Drum Brakes to Disc Brakes on a 2005 Boat Trailer
- Replacement Calipers for UFP DB-35 Disc Brakes
- How To Pick Out Disc Brake Kit for an EZ Loader Boat Trailer
- Aluminum Car Trailer Restoration and Replacement Brake Recommendations
- Replacement Disc Brake and Hub/Drum Assembly for 3,500 lb Boat Trailer Axle
- How to Determine if Kodiak Disc Brake Kit # K2HR35D Will fit Trailer
- Replacement Brake Pads for Kodiak Disc Brake Kits Rated for 3,500 to 6,000 Pound Axles
- Disc Brake Kit for 1999 Stratos Tandem Axle Boat Trailer
- Can I Turn or Grind Disc Brake Hub/Rotor to Remove Rust
- Recommended Parts To Convert Hydraulic Drum To Disc Brakes On EZ-Loader Trailer
- Stainless Steel Disc Brakes for 3,500 Lb. Axles with a 5 on 4-1/2" Bolt Pattern
- What Direction Should Disc Brake Calipers Face