Correct 5 Bolt Hub for #84 Spindle for 3,500-lb Trailer Axles
Question:
Could you confirm that AK1HUB-545-35-K hub fits TRU24R spindle? Thanks.
asked by: Jason G
0
Expert Reply:
Yes, I can confirm the Trailer Idler Hub Assembly part # AKIHUB-545-35-K will work with the #84 Spindle for 3,500-lb Trailer Axles part # TRU24FR.
expert reply by: Conner L
0
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Similar Expert Q&A Pages
- What Grease Seal Do I Need For A #84 Spindle
- Recommended #84 Spindle for a 3500 Pound Axle Measuring 2-3/8 Inches in Diameter
- Replacement 5 On 5 Idler Hub For Homemade Trailer
- Replacement #84 Spindle and Idler Hub with 5 on 5-1/2 Inch Bolt Pattern
- Idler Hub for Trailer Axle with 1-1/16 Inch and 3/4 Inch Tapered Spindle
- Replacement Spindle for 3,500 lb Trailer Axle with 2-3/8 inch Diameter
- Availability of Spindle that Would Fit Square Tube Axle
- What Size Axle Does a #84 Spindle Fit
- Determining Correct Replacement Axle For Older Axle With Obsolete L68149 LM12749 Bearing Combo
- Is There a #84 Spindle for 3,500 lb Trailer Axles That Comes With Brake Flange
- Spindle Dimensions of a 3500 lb Axle
- What Are the Dimensions of the TruRyde #84 Spindle for 3,500-lb Trailer Axles
- Replacement Hubs Based on Tapered Spindle Measurements
- What Axle Capacity Matches Spindle Diameter of 1.37 inch Where Inner Bearing Rides
- Availability Of Replacement Trailer Hubs With L44649 and LM11949 Bearing Combination
- Hub Recommendation to fit 84 Spindle TRU24FR
- What Grease Seals Do I Need For An # 84 Spindle
- Availability Of 5-5 1/2 Inch Hub Assembly, Spindle, Bearings Rated For 1,750 lbs. Each
- Cause for Uneven Tire Tread Wear on One Tire of Tandem Axle Utility Trailer
- Replacement Hub Needed for TruRyde #84 Trailer Spindle # TRU24FR
- Recommended Spindles And Hubs For Trailer With 6 on 5-1/2 Inch Wheels
- Is Redline Trailer # 84 Spindle a Fit for Dexter 8-247 Drums
- Availability of Brake Mounting Flange for Axle Spindle TRU24FR
- What Hubs Will Fit Redline 2-Inch x 4-Inch Round Spindle # TRU24FR
- Replacement Hub For Boat Trailer Using Bearings L68149 And L44649
- Stainless Steel Kodiak Disc Brakes for 3,500 Pound # 84 Spindle