Do you Have A SnapPad That Will Fit My RV/Travel Trailer?

Question

Question:

The 9 inch snap pads you have say for Class A and Class C motorhomes. Will these fit a Keystone Montana 5th wheel?

asked by: Cheryl P

0

Expert Reply:

All you need to do is take a look at the feet on your Keystone Montana 5th Wheel. Measure from one side of the pad to the next. Depending on the size, we have a lot of different shapes and sizes to choose from. If you have 9 inch round feet, use these SnapPads # SP54FR4. If they aren't all the same, we also have a kits with 2 different sizes like 9 inch and 12 inch pads # SP54FR74.

Whatever size jack feet you have, we have a SnapPad that will fit. Check out Shane's video, he does a good job explaining how to measure and the benefits of using these pads.

expert reply by: Adam E

0

Answer 1

Yes, it looks like you need the SnapPad XTRA XL Plus Jack Pads for Lippert Leveling Systems w/ 9" and 12" Round Jack Feet, #SP54FR74.

view full answer...

Answer 2

If the fabric on your Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - White #LCV000163285 is laying loose with no tension you've most likely lost the required amount of tension on your tension springs. You'll want to…

view full answer...

Answer 3

I have a solution for you, but my contact over at Lippert tells me that you won't be able to replace just those casings on Solera Slide-Out Topper. The parts you need are the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning -…

view full answer...

Answer 4

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 5

Hey TJ, I went out and opened up one of the Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System #LC324269 boxes and found that they include a 5/8-18 x 1-1/2" fine thread grade five bolt. I then called Lippert and they…

view full answer...

Answer 6

Hey Eleanor, the closest thing we have is the #BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. The little bit of extra height on your cutout won't be a problem since the face is 5-1/2" tall and would cover the…

view full answer...

Answer 7

Personally I prefer the SnapPad XTRA Jack Pads #SP54FR4 over the Stromberg Carlson #SC99MR as they have been around much longer and proven themselves to be a quality product. Both these will fit 4 jacks with a 9" round landing pad.

view full answer...

Answer 8

SumoSprings has to carefully word how much addition support their kits like the #SSA43 and #SSA42 provide since they don't want people to think they will be gaining additional suspension capacity when that's not what these kits are designed…

view full answer...

Answer 9

I recommend measuring the feet on your leveling system and noting the shape of the pad. That said, it should be 9" round pads and in which case you would use the SnapPad XTRA Jack Pads for Lippert Leveling Systems part #SP54FR4. If you have a…

view full answer...

Answer 10

Pierre, the Bauer Products Camper Door Lock #BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks,…

view full answer...

Answer 11

Thanks for reaching out and providing the photos, Ana! To replace the Lippert foot pad on your 2021 Grand Design Momentum 376THS you need the Lippert 5th Wheel RV Landing Gear Foot Pad Kit - 9" Round #LC314667. This comes with 2 of the pads so…

view full answer...

Do you Have A SnapPad That Will Fit My RV/Travel Trailer?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching