Does Curt Hitch C60633 Require Removing Exhaust Brackets and Spare  

Yes, the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch - 35,000 lbs item #C60633 will fit all models of the 2022 Ram 2500 so long as they do not have the factory towing prep package. I have linked an installation video. I recommend adding…

Yes. I was able to confirm with Curt, that their Curt Custom Underbed OEM-Style Gooseneck Hitch #C60633 is a confirmed fit on the 2020 Ram 3500.

There is a retractable tonneau cover for your 2020 Ram 2500 with a 6-1/2 foot bed, Ram Box and Cargo Management System that will allow you to keep the rails on your truck and not have to remove them. The rails will be used as a way to install the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey George, The Curt Custom Fifth Wheel Installation Kit for Ram Truck - Carbide Finish #C16427-204 would be a compatible fit for your 2020 Ram 2500 Tradesman with a 6.5' bed. If you plan on installing this yourself then I recommend following…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

Air bags like the Air Lift LoadLifter 5000 #AL88289 should be filled to a minimum of 5 PSI at all times. Filling them beyond that is done after the truck is loaded. The steps will go as follows: 1. Inflate air bags to at least 5 PSI 2. Load…

Hey John, The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box #GY98GR has a matching bolt pattern to your Rhino Box pin box. You will want to check your 5th wheel's pin weight to ensure the 3.5K model is going to be the right capacity though. With a…

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…