Replacement Hub for 2500 lb Trailer Axle with 5 on 5.5 inch Bolt Pattern
Question:
Hello. Is there a 5x5.5 hub that will fit on my dexter 2500 axle. Thanks
asked by: John F
0
Expert Reply:
Are you sure it's a 2,500 axle and not a 3,500? The 2500 isn't a standard one so we'd need to get bearing numbers/spindle dimensions to identify it.
expert reply by: Jameson C
0
Question:
L44649 L68149
asked by: John F
0
Expert Reply:
Thanks! Based on that you'd want the part # AKIHUB-555-35-K for if you need idler hubs or part # 84557UC3 for if you need a hub/drum.
expert reply by: Jameson C
0
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- How to Determine Correct Fit of Replacement Hub on Trailer Spindles
- Replacement 5-on-5-1/2 Idler Hubs & ST205/65-10 Tires for Sun Tracker Boat Trailer
- How to Identify Compatible Hubs to Allow New Wheel Bolt Pattern
- Is Lateral Movement Of The Hub Normal
- Spindle and Wheel Recommendation to Fit with Trailer Rim AM20053
- Idler Hub So That I Can Use 5x5.5 Bolt Pattern Jeep Wheels on My Off-Road Trailer
- Availability of Pre-Greased 3500 lb Idler Hub With 5 on 5 Wheel Bolt Pattern
- Recommendation For Replacement Hubs For 4 x 7 Utility Trailer With 5 on 5-1/2 Bolt Pattern
- Outer Diameter of Races Included with Trailer Hub # AKIHUB-555-35-K
- Picking Out Replacement Trailer Wheel/Tire for Trailer with 20053 Wheel
- How To Choose the Correct Replacement Hubs for a Rinker Captiva Trailer
- Recommended Idler Hub For Boat Trailer With 3,500-Lb Axle
- How to Determine Replacement 5 on 5-1/2 Inch Bolt Pattern Hubs 2004 Yacht Club PLC Trailer
- Changing From 5 on 4 1/2 Bolt Pattern Hubs to 5 on 5 1/2 Bolt Pattern
- Replacement #84 Spindle and Idler Hub with 5 on 5-1/2 Inch Bolt Pattern
- How to Order 3,500 lb Dexter Axle 35545I-EZ-89 with 5 on 5-1/2 inch Bolt Pattern Idler Hub
- Is There A Bearing Buddy That Will Replace A Tie Down Engineering 48399GA Turbo Lube Cap?
- Trailer Spindle & Hub With 5 on 5-1/2 Bolt Pattern
- Recommended Timbren Axle Less System and Hub with 5 on 5-1/2 Bolt Pattern
- Hub Replacement for Old Trailer with 5 on 5-1/2 Inch Wheel Bolt Pattern