Do you Offer 9 SnapPads and What Benefits do they Have

Question

Question:

Would like to know wether you have a 9 jack pad and the advantages they provide. Thank you

asked by: Konrad S

0

Expert Reply:

We do offer the 9" snap pads like SnapPad Jack Pads part # SP54FR6. Depending on whether you have a 5th wheel or a motorhome there is a slight difference between them but I would be happy to help you select the correct ones if you provide that information. I have linked the entire selection for you to check out but would be happy to point you in the right direction.

They offer a lot of benefits. They eliminate the needs to crawl under each time to place a pad under your levelers, they help to prevent sinking, they protect surfaces like driveways from scratches when at home, when out and about they offer a slight bit of shock absorption for more comfortable camping and also keep your landing levelers clean to help prevent rusting and corrosion of them.

expert reply by: Randy B

0

Answer 1

SnapPads like the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 Item #SP54FR6 can be taken off and on as needed so you won't have to keep replacing them every time you need to take them off.

view full answer...

Answer 2

Hello Brian; the 3/8" difference isn't enough to matter so you can use the #e89FV as a replacement. We do have the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb Round Trailer Axles #APUBR-8 for 3" diameter axles. This has 7" long…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Kevin; the answer to your question is yes. The DeeMaxx Disc Brake Kit w/ Actuator #DE66AR will work with your 2024 Ram factory brake controller.

view full answer...

Do you Offer 9 SnapPads and What Benefits do they Have

Product Page this Question was Asked From

Continue Researching