What Gooseneck Wiring Option do you Recommend for my 2020 Ram 2500  

If you are wanting something light weight then the Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C86JR is the right hitch for you. The CrossWing weighs in at 87 lbs. The main concern with using the CrossWing on your 2021 Ram 2500 is that…

The main difference between the Curt 5th Wheel/Gooseneck Custom Wiring Harness part #C56070 and the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness part #41157 is that the Curt harness is 7' long and comes with a one year warranty…

For your 2022 Ram 2500 I recommend going with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers item #AL88289 over the Firestone item #F2598. These have a 5,000 lbs weight capacity and the air springs have internal…

The best base rails and installation kit for your 2019 Ram 2500 with a 6-1/2 foot bed are from B&W: - B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2602 The reason the B&W #BWRVK2602 are so highly…

I attached an install video that shows where we installed the Fifth Wheel Wiring harness part #C56000 in a 2016 Ram 3500 just like yours. Our installers put it right between the tailgate and the left wheel well.

The best option for a high-capacity sliding 5th wheel hitch that can be removed when need on your 2018 Ram 3500 is an option from Curt, and I'll also list out the proper base rail and install kit for your Ram in case you also need those: - Curt…

The Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230 that you referenced comes with safety chain tabs that install into open slots on your fifth wheel rails like you can see in the attached picture.

There is a 5th wheel wiring harness for your 2020 Chevy Silverado that was designed to fit perfectly in the factory cut out in your truck bed. The harness you need is the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #HM54FR. I have…

The Curt 5th Wheel/Gooseneck Wiring Harness #C56070 does need to be installed in your 2015 Ford F-350's truck bed, between the rear post and the wheel well, like in the accompanying photo. I have added a link below to the instructions and a video…

The Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long #C56000 will allow you to put the trailer connector in the front of the bed. The front is more difficult because of the space, so you just may want to consider the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…