Can Hitch Reducer Be Used for 2 Inch Weight Distribution Shank in 2-1/2 Inch Hitch
Question:
Recently upgraded to a Chevy 2500 with a 2 1/2inch receiver. Can I still use the 2inch shank on my current Blue Ox with the 2inch shank assuming I can get the correct ball height with out causing any type of problem? The receiver on the 2500 is rated for 2000 lbs. tongue weight.
asked by: Cliff E
Expert Reply:
You certainly can!
I'd recommend a reducer sleeve like part # BWRHXA2182 which is designed for this purpose. This reducer has pinched ends to prevent it from sliding into the 2-1/2 inch receiver too far, so it'll be easy to line up the hitch pin holes. A reducer sleeve might allow slight movement of the shank, but the spring bars will put enough leverage on the weight distributing shank that this shouldn't be an issue.
I've linked to a product demonstration video featuring the reducer sleeve I mentioned.
Products Referenced in This Question
B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- B and W
more information >
Product Page this Question was Asked From
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
- Hitch Adapters
- Hitch Extender
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 18 Inch Extension
- Fits 2 Inch Hitch
- 3500 lbs
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: B&W Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Video: B and W Hitch Receiver Reducer Sleeve Review
- Search Results: 2 1 2 inch weight distribution shank
- Shop: Blue Ox Hitch Receiver Immobilizer III for 2-1/2" Hitch with 2" Adapter
- Video: Let’s Check Out the Blue Ox Hitch Receiver Immobilizer II
- Q&A: 2-1/2 to 2 Hitch Reducer Sleeve to Fit 2-1/2 Depth of GM-Style Hitch Pin Hole
- Shop: Trailer Hitch
- Shop: Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Video: An In-Depth Look at the B and W Hitch Receiver Reducer Sleeve
- Shop: Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Amber Lens
- Shop: Reese Weight Distribution Shank for 2" Hitches - 9 Hole Adjustment - 1,200 lb TW
- Shop: Adapter Sleeve for Fastway and Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers
- Shop: Mini LED Side Marker Boat Trailer Light - 2 Wire - Amber LED - Clear Lens - 18" Wire
- Search Results: 2 12 inch hitch reducer
- Search Results: equalizer weight distribution hitch
- Video: Feature Review Bargman 7-Way Molded Trailer Wire Connector
- Video: Checking Out the Curt TruTrack Weight Distribution System w/ Sway Control
- Video: In-Depth Review of the Curt 7-Way to RV Socket LED Circuit Tester
- Video: In-Depth Review of the Curt Trailer Hitch Receiver Lock
- Shop: BOLT brand vehicle and hitch locks
- Article: Trailer Hitch Receiver Sizes
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Why Does Use of Hitch Adapter/Extender Reduce Hitch Tongue Weight and Trailer Weight Ratings
- Q&A: Does Extending Tongue of Trailer Affect Tongue Weight Capacity of Trailer Hitch
- Q&A: Does Using A Hitch Extender Affect Both Tongue Weight and Trailer Weight?
- Q&A: Hitch Reducer and Hitch Extender Effects on Hitch Capacity
- Q&A: Do Hitch Extenders Work Without Capacity Reduction When Flat Towing
- Search Results: 7 way tester
- Search Results: locking hitch pin
- Q&A: Recommended 2-1/2" to 2" Hitch Reducer for Ford F-250