Will the Draw-Tite Front Mount Hitch 65046 Fit a 2003 Dodge Ram 3500

Question

Question:

Will the Draw-Tite Front Hitch for the 2003 Dodge Ram Pickup #65046 fit laramie 3500?

asked by: Charles T

0

Expert Reply:

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver # 65046 that you referenced will work on your 2003 Dodge Ram 3500. I attached an installation video and instructions for this product for you to check out also.

expert reply by: Jameson C

0

Answer 1

The Curt Front Mount Trailer Hitch Receiver #31320 will provide better ground clearance for your 2005 Dodge Ram 1500 by approximately 3 inches. I have attached a photo that will show you the measurements from the mounting surface of each hitch to the…

view full answer...

Answer 2

I checked with Draw-Tite and front mount hitch #65046 does not exclude Laramie models of the 2003 Dodge Ram 3500. Curt hitch #C31017 excludes Laramie models on the 3500 series. However, for the Draw-Tite hitch one customer said that the tow hook…

view full answer...

Answer 3

I spoke with my technical contact at Curt referencing the front hitch #C31017 and he gave me the following reasons why Curt states that this hitch will not fit your 2005 Dodge 3500 Laramie. The manufacturing of the 3500 Laramie is physically slightly…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

I would be happy to and thanks for the pictures! The B&W Heavy-Duty Trailer Hitch item #BWHDRH25122 measures 5.4" from the top of the frame brackets to the top of the receiver and 19-1/2" to the back of the receiver from the last bolt.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I attached a picture of how the Draw Tite front hitch part #65063 installs and it uses the tow hooks to bolt through the mounting plate of the hitch to the truck frame. Since you have the area available where the tow hooks install I'd recommend…

view full answer...

Will the Draw-Tite Front Mount Hitch 65046 Fit a 2003 Dodge Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching