RV Trailer Hitch Receiver for 68-1/2 Inch I-Beam Frame
Question:
1 The Curt 13704 specs say 22-66 inch wide yet I found several question answers that say 68.5 inch is OK? Why do they list 22-66? My I-beams are 68.5 inches on center so if I use the 2 inner flanges it would be less then 68.5 2 The I-beam flanges are 1 inch wide on each side of the i-beam. The attachment bolts as 5/8 inch which would only leave 3/16 inch on each side of attachment hole. Would that be structurally sound?
asked by: Jerry H
Expert Reply:
We do have an adjustable-width RV trailer hitch receiver that will work for your I-beams spaced 68-1/2 inches apart, though the 13704 you mentioned is only for frames up to 66 inches apart. In the past it was for slightly wider frames but the manufacturer updated the dimensions.
So because your I-beams are 68-1/2 inches apart, the correct hitch for your trailer is the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703.
This uses brackets that and 1/2 inch bolts to attach to your I-beam, as you can see in the cut outs I added, and that will absolutely be structurally sound; or if you choose you can also have the hitch welded on.
I have added links below to both the instructions and a video install for you to check out as well if you'd like of the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703.
Products Referenced in This Question
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Product Page this Question was Asked From
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Mount-n-Lock Heavy-Haul'r Extreme Duty Replacement RV Bumper - 6" - 600 lbs - Mil Finish
- Shop: Mount-n-Lock Heavy-Haul'r Extreme Duty Replacement RV Bumper - 4" - 500 lbs - Mil Finish
- Shop: Cargo Capacity Upgrade Kit for Mount-n-Lock ShakeStopper 1H4HZ Hitch
- Video: Stromberg Carlson Adjustable Accessory Hitch Receiver Feature Review
- Search Results: tow hitch
- Search Results: hitch
- Search Results: trailer hitch
- Search Results: rv and camper hitch
- Search Results: rv trailer hitch
- Video: Set up: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide on a 2009 Chevrolet Kodiak
- Video: Hands-On with the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets
- Video: Mount: etrailer Trailer Hitch Receiver on a 2024 Subaru Crosstrek
- Video: Ultimate Overview of the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets
- Video: Ultimate Overview of the No-Drill Mount for Electrical Mounting Bracket
- Video: Review of the Curt Adjustable Trailer Hitch Receiver
- Shop: Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide
- Shop: Blind Spot Detection
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Shop: Mount-n-Lock HiLoHitch for 4.0" RV Bumpers - 2" Hitch Receiver - 300 lbs
- Shop: Fifth Wheel Hitch
- Search Results: running boards
- Search Results: adjustable hitch
- Shop: Suspension Enhancement
- Q&A: Is There A Replacement Pin Box For The Lippert Rhino Box
- Q&A: Troubleshooting Stuck Latch Pin to Remove B&W Companion 5th Wheel Hitch
- Q&A: Where Does Rubber Bumper Install in Reese 16k Fifth Wheel Hitch
- Q&A: Replacing Rhino Box Pin Box with Trailair Air Ride 5th Wheel Pin Box on 2022 Arctic Wolf 291RL
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
on Accessories and Parts
