Compatibility of Parts Needed to Flat Tow 2017 Jeep Cherokee Behind Motorhome  

Question:

Helpful Expert Reply:

You've almost got it!

The Blue Ox # BX1138 base plates are a fit for a 2017 Cherokee, unless it's a Trailhawk model in which case you'd use # BX1136. The Hopkins # HM56208 would work well, as well as the # BX88206 umbilical, but you'd need to cut off the 4-pole connector on the # HM56208 and wire it into the 6 pin socket included with the umbilical. The # RM-910030-5 bracket would be fine, as would the Blue Ox Patriot braking system # BLU37TR. For a tow bar, the Blue Ox Ascent # BX4370 would work perfectly. The # RM-156-25 charge line kit is also recommended.

There are a couple of more items. The 2017 Jeep Cherokee Trailhawk will need the Mopar 68321424AB flat tow wiring kit to activate the electronic power steering system while the vehicle is in tow mode. You'll need to obtain the part from your Jeep dealer. You will also possibly need a high/low adapter if the installed height of the base plates is more than 3 inches higher or lower than the receiver on the motorhome. I'll link you to our selection of adapters.

I've linked to several install and demonstration videos that I hope you'll find helpful.

expert reply by: Mike L

1