Underbody Panel Trimming Dimensions for Curt C11416 hitch for 2018 Honda HR-V  

We do have some solutions for you, but I definitely would not grind down any hardware that was used to install the Curt Trailer Hitch #C11416 on your 2016-2018 Honda HR-V. This could compromise the integrity of the hardware and lead to failure in…

It's absolutely normal. The exhaust system attaches to your vehicle using rubber isloators which means that the position of your exhaust can vary, sometimes by a surprising amount from vehicle to vehicle. However, your Curt #C11416 hitch is…

When we installed the Curt hitch part #C11416 on a similar HR-V as your model we found that the trick to getting the U-bolt nuts installed properly was to tighten them down evenly so that the nuts wouldn't overlap. We have torque wrenches…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Well Curtis, we do have the Draw-Tite Max-Frame Trailer Hitch Receiver #DT84YR which I do see you already found for your 2017 Honda HR-V. This has the 2" opening and is rated up to 300lbs of tongue weight like you are looking for so it does meet…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…