Question:
I have a 2021 Honda Goldwing with a California Side Car kit . The CSC has a 6 way SQUARE female end and my Aluma trailer has a six way ROUND male end . My question is do you have a adapter to connect my trailer to my bike ?
asked by: Ira L
Expert Reply:
I have an option for you, but there is not an adapter made to go between your 6-way square female end on your California Side Car and the round 6-way on your trailer.
One option would be to use the Curt 6-Pole Square Trailer Wiring Connector Loop # C58034 and cut off the female end and install the Pollak 6-Pole, Round Pin # PK12720. This will require you to use a circuit tester like the # PTW2993 to confirm the functions of your 6-way square connector and match them to the functions of your 6-way round connector.
The option I recommend is replacing your 6-way square plug and replacing it with the Pollak # PK12720 that way you will not need to use an adapter.
I included a video of each of the products mentioned, and a link to a helpful article that goes over wiring for you to take a look at.
Curt 6-Pole Square Trailer Wiring Connector Loop - Vehicle and Trailer Ends
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
