Recommended Solution for Ball Mount with Multiple Hitch Balls and 7" Drop That Won't Drag  

Hey Bill, thanks for reaching out! It sounds like you're needing something like the Scissor Stabilizer Jacks w/ Handle #TJSCHD-24. This has a few different holes for the mounting hardware so it should be able to match up with the bolt pattern you…

Yes, the B&W Tow & Stow 3-Ball Mount #BWTS10049B that you referenced will fit your 2002 Ford F-350 without any problems. It's designed to fit 2 inch hitches like what your truck has as well. I attached a picture of it installed on a…

No matter what kind of towing we got you covered. Out of all of our towing products my recommendations all include part from B&W because they make some of the best towing equipment on the market (made in the USA!) which is backed by a lifetime…

The 20.5" ball height you referenced for your Sol Dawn Rover Travel Trailer is height that the coupler sits at. This means that you would need the hitch ball on your 2017 Nissan Frontier to be sitting at 20.5" for the trailer to ride level…

To tow your trailer you will ideally want to go with a ball mount that will give you a 7 inch drop. The #D900 can do up to a 6 inch drop. Which if the rear suspension of your vehicle will sag slightly when it is hooked up to the trailer then it will…

The B&W Tow & Stow 3-Ball Mount #BWTS10049B measures approximately 5-1/4" from the top of the receiver to the top of the 2" ball when in the lowest position. Keep in mind that drop is measured from the top of the shank to the top of…

Due how tall the rear of your 2018 Ram 2500 would be I would go with the 7 inch drop version of the B and W Tow and Stow part #BWTS10049B as you'll need the extra range.

The Curt Trailer Hitch #C86HR is an excellent choice for your 2018 Ford F-150. Then for wiring you can either install the Curt #C56110 if you have the rectangular OEM plug or the Curt #C55774 if you have the round OEM plug. Both of these options give…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

No, they will not but I have a custom fit set that does. They are the Curt item #C16427-204. This set of rails is industry standard so they will work great with your Curt Q20 Slider. The brackets are custom fit and install in pre-existing holes in…

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…