Fit of Küat PVP20B Pivot 2 Swinging Extender on 2020 Mercedes-Benz SL
Question:
Can I use a Kuat Pivot 2 that swings to the passenger side on my Mercedes Sprinter 2020 4x4 with factory receiver and factory built in step. Keep in mind the factory step is approximately 15 inches wide and about 7 inches deep and is on the passenger side of the receiver. My Rak Attach will not fit because the step prevents me from ing the tongue all the way into the receiver. Thanks
asked by: John P
Expert Reply:
What you'll need to do is measure how far the hitch pin hole in your hitch receiver is recessed toward the front of the vehicle when compared to the furthest rearward obstruction whether it be the face of the bumper or the hitch step, if it extends further rearward than the face of the bumper.
The shank of the Küat # PVP20B Pivot 2 measures 5-3/16 inches long, measured from the hitch pin hole to the closest part of the Pivot 2 extender. So, to see if it will work with your factory step, find the hitch pin hole in your receiver, and measure 5-3/16 inches rearward. If that point clears the factory step, the Küat Pivot 2 will work perfectly for you.
I've linked to a product demonstration video featuring the Küat # PVP20B Swinging Extender.
(click to enlarge)
Product Page this Question was Asked From
Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger's Side
- Hitch Adapters
- Swing-Away Hitch Adapter
- Bike Racks
- 250 lbs
- Kuat
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Passenger's Side
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 8" Long
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Video: Install: Yakima EXO SwingBase Swing Away Hitch Extender on a 2020 Honda Odyssey
- Video: Fit Test: Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks with 2019 Toyota RAV4
- Search Results: kuat pivot 2
- Search Results: swing out hitch
- Search Results: hitch riser
- Search Results: kuat
- Search Results: anti~rattle hitch lock
- Search Results: roadmaster quiet hitch
- Q&A: Will The Surco Folding Bracket Adapter Work With A MaxxHaul 70275 Cargo Carrier
- Video: Checking Out the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches
- Search Results: anti rattle hitch pin
- Video: Detailed Breakdown of the Roadmaster Quiet Hitch for 2" Trailer Hitches
- Video: Fit Check: Testing 22-1/2x49 Curt Cargo Carrier on a 2019 Chevrolet Suburban
- Video: An In-Depth Look at the etrailer Cargo Bag w/ Mounting Straps
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Video: Comprehensive Review: etrailer Hitch Pin Alignment Collar for 2" Hitch Accessories
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Article: How to Measure for Trailer Hitch Drop
on Hitch Adapters
