bing tracking image
Q & A Icon

How to Determine if JT's Strong Arm Jack Stabilizer Kit for Travel Trailers Will Work

Question:

I am looking to add these to my 21ft 17ft box C channel frame trailer/RV. How can I be sure these will fit so I dont have to go through a return problem. Are there dimension setup instructions ?

1

Helpful Expert Reply:

There is really only a couple measurements needed in order to determine the fit of the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025.

This kit is universal, so the only dimensions you need to ensure are the distance to a crossmember for the front and rear stabilizer jacks. Per steps 2 and 3 of the instructions:

"2. Locate a cross-member rearward of the rear jacks at a minimum of 4” to a maximum of 18” for jacks mounted at an angle. For jacks mounted square with the chassis frame, use a minimum of 6”.

3. Under front half of chassis, locate a cross-member or center compartment with a steel floor from 6”-18” from front of front jacks."

Those would be the only two measurements that are needed, though for peace of mind I do recommend checking out the linked installation instructions below of the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025.

helpful expert reply by:
1
Kyle S

Product Page this Question was Asked From


Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>