Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
Question:
I want to buy replacement bearings and seal for my 2021 Shoreland’r trailer. It has 4440160, 4440170 bearings, and a 4410130 seal. The spindle is 1-3/8 x 1-1/16”. What is a good way to cross reference these numbers?
asked by: Keith P
0
Expert Reply:
Based off the measurements you provided, you've got a #84 spindle, so the correct bearings are the # L44649 and # L68149, and # RG06-050 grease seals. We typically try to put bearing numbers of popular manufacturers on the bearing pages but those are Shoreland'r part numbers so they're not on the product pages currently.
You can get these in a complete kit with the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100
expert reply by: Erik B
0
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Similar Expert Q&A Pages
- Is Idler Hub With 6 on 5-1/2 Inch Bolt Pattern Available for 3500 lb Axle
- Will the Trailer Hub AKIHUB-655-35-K Fit a 3,500 lb Dexter Axle
- Availability Of 5 On 4-1/4 Hubs And How To Measure A 5 Or 6 Lug Pattern
- Replacement Hub for 1986 Shorelander Boat Trailer
- What Spindle Does Trailer Hub # AKIHUB-655-35-K Fit
- 2006 Chevy Colorado Spare Tire Use for 6 on 5-1/2 Inch Trailer Idler Hub Assembly
- How to determine what size hub I need?
- How to Convert 3,500 lb Dexter Axle from Wheel Bolts to Wheel Studs
- Availability Of 6 on 5-1/2 Idler Hub With LM67048 And L68149 Bearings
- How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- How to Pick Out Replacement Hub for Shoreland'r Trailer
- Will Chevrolet 6-on-5-1/2- Bolt Pattern Wheels Fit Trailer Idler Hub Assembly AKIHUB-655-35-K
- Hub Needed That is Compatible with L44649 Inner and Outer Bearings and a Grease Seal with 1.25 ID
- Can A Trailer With Wheel Lugs Be Converted To Use Wheel Studs?
- Will AxleTek Trailer Idler Hub Assembly # AKIHUB-655-35-K Fit 2007 5x8 Enclosed Trailer
- Replacement Trailer Hubs Using L68149 and L44649 Bearings
- Availability of Hub With 6 on 5-1/2 Bolt Patter for 2k or 3.5k Axle
- Replacement Timbren Axle-Less System and Hydraulic Brake Assembly for 3,500 lb Axles on Boat Trailer
- Trailer Hub with 6 on 5-1/2 Bolt Pattern for #84 Spindles that Uses L44649/L68149 Bearings
- Recommended Idler Hub With 6 On 5-1/2 Bolt Pattern For Timbren Axe-Less Suspension
- How to Determine Correct Hub With 6 on 5-1/2 Bolt Pattern for Trailer
- Spindle and Idler Hub Assembly for 3500 lb Round Trailer Axle
- Recommended Spindles And Hubs For Trailer With 6 on 5-1/2 Inch Wheels
- Wide Trailer Tire Recommendation for Building Trailer that will be Used on Sand