Curt Goosneck Hitch Fit for 2021 Ram 3500  

We are not familiar with the problem you're describing on the TorkLift SuperTruss Hitch Extensions, #TLE1521. TorkLift makes their products here in the USA, but it is possible that your extension was made on a Monday. I spoke with my contact at…

We sure do! For the factory gooseneck hitch on your 2018 Ram 3500 I recommend the Curt Ball and Safety Chain Loops Kit #C60618. This kit includes the 2-5/16 inch hitch ball that will mount to the factory gooseneck receiver and the 2 safety-chain…

I spoke with my contact at Curt and he had a way for you to release the ball from the underside of the hitch. From underneath of the vehicle the customer will have to remove the cover/plug on the bottom of the ball if there is one. This will reveal…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Great question, Jason. The jaws on the BW Companion #BWRVK3600 don't overlap like the A25 #C16046, but they are a massive 1" thick and have never had a problem keeping hold of the king pin. I personally like the jaw system of the Demco UMS…

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…