Can I Leave the Tailgate On the Truck and Use the Brophy Hitch Stair # RHS2  

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

The Brophy Tailgate Scissor Step Mounting Bracket, #TSSB is not confirmed to fit with the TorkLift GlowStep Camper Scissor Steps, #TLA7503-8000. The #TSSB is however designed to work with Brophy manufactured steps of similar dimensions to the…

If you were willing to mount the mount bracket of the Brophy Scissor Step kit part #AS23 to your truck's tailgate yes this will fit and work well for you.

Yes, you can mount the Brophy Steel Scissor Steps, #SS04, to a truck tailgate. I recommend installing the mounting bracket on the top of the tailgate (see photo). To install the mounting bracket, you will want to use four 1/4 inch x 1-1/2 inch long…

The current draw of the Everchill Refrigerator for RVs #324-000119 is 11 amps or 132 watts at 12 volts. I attached a review video for this for you to check out as well.

The legality of an obscured rear license plate varies from state to state. If you want to heed the letter of the law, the plate can be relocated to the rear of the cargo carrier. We sell quite a few cargo carriers, and to be honest, it is really not…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The connector for the Tekonsha Plug-In Wiring Adapter #3070-P is located above the parking brake on your 2023 Honda Ridgeline. Even knowing where it is still proves difficult to get to the connector and attach the wiring adapter. I know several…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…