1 Inch D-Ring Adapter for Blue Ox Tow Bar  

Since you have 3/4 inch thick D-rings you need the part #BX88357 since you have a Blue Ox tow bar. If you had a Roadmaster tow bar instead you'd want the #RM-035.

There are a couple choices for you that will be based on the bumper you have. Blue Ox Aftermarket Bumper Adapter #BX88358 -Bumper tab thickness: 3/4", 7/8", and 1" -Pin Hole diameter: 1" Blue Ox Aftermarket Bumper Adapter #BX88357…

If your Jeep has an aftermarket bumper installed with 15/16" holes (0.9375). The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin, #BX88357, is identified with a nominal hole diameter of 7/8". It specifically states minimum of…

So there isn't a tow bar that will attach directly to the D-rings on your 2001 Jeep Wrangler; you'd need an adapter and then a tow bar that fits the adapter. Realistically there isn't an inexpensive way to do this, but I'll give you…

It sounds like you're looking for the Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars part #BX88358 which are designed for Blue Ox motorhome mounted tow bars and bumpers with a 1" thick d-ring. I have attached a video…

Yes, since you have a 1 inch d-ring on your off-road bumper and a Blue Ox tow bar you can use a D-ring adapter like the Blue Ox 1-inch D-ring adapter part #BX88358 and you'd be set.

No, having play in the your Roadmaster D-Ring Mount Adapters #RM-035-1 can cause friction which will lead to them failing. You'll want to measure the thickness of the your D-Ring mount and order accordingly. based on the picture you provided it…

No, the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035 is only compatible with Roadmaster branded tow bars. For a Roadmaster tow bar similar to your Demco Dominator I recommend the Roadmaster Nighthawk All…

Blue Ox has a similar adapter with the part #BX88358 which works with the Aventa tow bar and fits 3/4 inch D-rings but the part #RM-035 only fits Roadmaster tow bars so it wouldn't work for you.

In order to flat-tow a 2021 Jeep Gladiator you'll need base plates, tow bar, safety cables, supplemental braking system, and a lighting kit. The Jeep is pretty easy to setup for flat-towing and you'll only need the basics for this. I have…

The part of the adapter that attaches to the D-rings will have a fixed size pin; either 3/4 inch for #RM-035 or 1 inch for #RM-035-1. The other ends of these adapters attach to the tow bars. So neither one of the adapters will work with both 3/4 and…

The Curt Custom Base Plate Kit #C59JR can not be used in the fashion you have pictured. Not only is it unsafe but it wouldn't connect to the tow bar the way you have it. Based on your picture it looks like you do not have the modular bumper and…