Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube  

You would need to measure the inside diameter of the hub opening to determine which cap size is needed. You would want to choose a cap whose outside diameter matches the inside diameter of the hub. Some of the most common sizes are 1.980 inch,…

The 2-1/4 and 2-1/8 grease seals are usually interchangeable but manufacturers have started going to the 2-1/8 model for a tighter fit. So what you would need is #GS-2125DL for one seal or #RG06-090 for a pair. We can't swap the seals out of…

The Timbren Axle Less Kit part #ASR2KHDS03 that you referenced is essentially a 2,000 lb axle so it would take two of them for a 4,000 lb trailer. If you have a 4,000 lb trailer axle the most similar option that would work well you'd want…

I'd love to help but we don't have any hubs for this axle as it's appears very odd and uncommon. The best option we can offer is a new axle. In order to choose the correct replacement axle for a trailer you'll first want to start with…

If your KZ Spree trailer's 3500-lb-rated axles are bent from damage or from overloading them beyond their weight capacity then they should be replaced. This will not only restore the trailer's handling but it will also prevent continued…

To determine your spindle size, you can either pull one hub off your trailer and look at the bearing numbers on the face of the inner and the outer bearing, or you can measure the spindle itself. I've attached an article and a photo to assist. If…

The correct braking system to use with the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle #ASR35HDS02 includes the Electric Trailer Brake Kit #AKEBRK-7-SA and 2 of the Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K. Since…

A Timbren Rear Suspension Enhancement System such as #TFR1504D which fits your 2013 Ford F-150, does not take the place of a weight distribution system. The Timbren systems will help reduce body roll and absorb shock but will not transfer the load of…

The code "LRE" means the tire has a load range e rating. This is similar to the ply rating that was once used to gauge weight capacity but that is now carried out by the load range rating. For replacement, we have the Provider ST235/80R16…

The trailer hubs we offer like the part #8-385-81SP that you referenced are sold individually. So if you needed enough for a trailer axle (two) you'd need to order a quantity of 2.

The 15" term is in reference to the size wheel that the Provider ST225/75R15 Radial Tire is mounted to. This particular part #A225R6FPS is a tire and wheel combo. The wheel has a 6 on 5-1/2 bolt pattern which is important to know so that your…

There is no difference between these parts the 8-388-30 is simply Dexter's updated part number for the #8-388-80UC3. The part will work on Dexter Nev-R-Lube Axles that are 6,000 lb capacity and will give you a 6 on 5-1/2 inch bolt pattern. This…