Bypassing Factory Brake Controller and Installing Aftermarket Model on 2018 GMC Sierra 3500
Question:
I’m towing a 2019 Jayco 387RDFS Fifth Wheel with a 2018 GMC Sierra 3500HD, 6.6L Duramax, DRW, Long Bed. On several occasions, the brake controller in the truck failed. The first failure was because it blew a 30AMP fuse, which I believe is a fuse for the trailer brakes. The second failure was because of module in the GMC Sierra’s trailer braking system. The third failure was because of different module in the GMC Sierra’s trailer braking system. I get an occasional warning message regarding the trailer brakes or connection. I need a reliable brake controller that will override the factory trailer brake system in the GMC Sierra. The ideal situation would be to have an autonomous trailer brake controller that I can quickly switch to if the factory trailer brake controller fails. Second to that would be to just completely override the factory brake controller with a reliable brake controller. I’m hoping to get some suggestions.
asked by: Dave K
Helpful Expert Reply:
There isn't anything like an autonomous controller that would step up if the factory controller fails.
I'd simply bypass the existing factory brake controller. The GM ITBC, although it works better now than the earlier models has been problematic enough that Tekonsha who provides many of our aftermarket brake controllers has a technical bulletin that specifically addresses how to bypass the factory controller. Let's just say you aren't the only one that's had problems with the factory brake controller.
If you'd like the controller to stay with the trailer and not be permanently installed on the vehicle, the Tekonsha # TK94FR Prodigy RF would be a good choice. To bypass the factory controller, all you'll need to do is locate the harness feeding the factory 7-way trailer connector and peel back the wire loom and electrical tape protecting it. Locate the blue wire exiting the rear of the trailer connector and sever it, leaving a few inches of wire so you can reconnect it if need be or install a vehicle mounted brake controller in the future.
If you're wanting to tow multiple trailers, it would be more feasible to install a controller in the vehicle like the Tekonsha P3, part # 90195. The P3 is one of the controllers I recommend most often because of how good the user interface is and because of the features the controller provides. The controller provides 5 storable settings that you can used for different trailers. You'll only need to set the controller up once per trailer then toggle back and forth as you change trailers. The controller provides a full LCD display to alert you to any problems in the braking system in plain English (or French or Spanish, if you'd prefer) instead of a color changing LED or an alpha-numeric error code that you'll have to remember.
If you decide to go this route, you'll also need the # 3016 wiring harness that connects the brake controller to the connector in the junction box on the firewall behind the e-brake pedal as shown in the linked video.
I'll link to the tech bulletin that will walk you through the process of installing the vehicle-mounted controller. In a nutshell, you'll cut the blue wire of the # 3016 behind the brake controller, leaving a few inches so you can splice on a length of # 10-1-1 wire long enough to run through the firewall, into the engine compartment and under the vehicle to the trailer connector on the rear bumper. You'd sever the wire as described above, and attach the blue wire you've ran from the front.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Remote Control
- Trailer Mount
- Digital Display
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Trailer Wiring
- Shop: Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Q&A: How to Bypass Factory Integrated Brake Controller on 2015 Chevy Silverado 2500
- Shop: Trailer Hitch
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Suspension Enhancement
- Shop: Fifth Wheel Hitch
- Video: Setting up the Longview Custom Towing Mirrors on your 2024 GMC Sierra 1500
- Shop: 10 Gauge Primary Wire - Blue - per Foot
- Video: Set up: Curt TriFlex NEXT Trailer Brake Controller on a 2021 Jeep Cherokee
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Q&A: How to Bypass Factory Brake Controller in 2019 Silverado 3500 With Prodigy P3
- Shop: Towing Mirrors
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Q&A: How to Bypass Factory integrated Brake Controller on a 2014 Chevy Silverado 3500
- Search Results: 3016
- Search Results: bump stops vehicle suspension
- Search Results: dump trailer
- Search Results: 10 guage wire
- Search Results: 90195
- Search Results: tk94fr
- Search Results: 10~1~1
- Q&A: Disabling the GM Factory Installed Integrated Trailer Brake Control (ITBC) on 2018 Silverado 2500 HD
- Shop: Grille Guard
Patrick
3/4/2024
can you share the link to the video bypassing the itbc