Is There a B&W Turnoverball Underbed Gooseneck Trailer Hitch for a F-550 Cab and Chassis  

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Byron, Sorry for the wait, I got the BDBPB added to our site under the SmartPlug RV Internet Inlet - 1 Ethernet Port - Black #SM96MJ.

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

For your 2016 Ram 3500 with the CM Flat Bed I recommend using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100. This will attach to the 5th wheel pin box and convert it to be used with your gooseneck ball. You will not need an…

I do have an option for you but there are not any custom fit gooseneck trailer hitches for your 1997 Ford F-350 Cab and Chassis. In order to install a gooseneck trailer hitch you would need to have a fabricator install a set of braces that span the…

Hi Rick, The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #GY86GR could potentially work but you'll need the correct gooseneck to fifth wheel hitch adapter or you'll want to switch to a gooseneck pin box like #GY98GR. The #GY86GR is designed…

The B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3050 has rubber pads on the bottom of the base (one in each corner) which you can see from the attached photo so there won't be direct steel to aluminum contact…

Douglas, it looks like the closest we have to what you're looking for is the Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR. These fenders measure 72" x 10 3/4" x 20 1/2", have the backing plates you're looking for, and…

I had the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch #3375613500 measured and have a picture with all measurements included. This is indeed rectangular and is typically installed with the longer sides going across the bed area.…

The base dimensions of the B and W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter #BWRVK3050 is 18 x 18-inches and will install it in an opening that measures 20 x 20 x 4-inches deep. The recessed opening cannot be more than 4-inches…