Equipping a 2020 Jeep Grand Cherokee for Trailer and Flat Towing

Question

Question:

I have a 2017 Forest River Forester RV and a 2020 Jeep Grand Cherokee Limited. I need a complete tow package and installation to flat tow the Jeep. Can you help?

asked by: Michael B

1

Helpful Expert Reply:

Let's begin with a hitch and trailer wiring for towing your RV with the Jeep Grand Cherokee. For a hitch, I'd recommend the Curt Class III hitch, part # C13182. You'll also need a ball mount and a trailer ball, provided in the # 989900 etrailer ball mount kit.

For a brake controller, I'd go with the Curt # C51180 Echo Wireless Brake controller. The Echo will communicate wirelessly with your smart phone, which you'll use to control the braking action of the trailer.

For a vehicle equipped with the tow package, use # HM40975 for a trailer connector. If it's not equipped with the tow package, use # 118727 and the # ETBC7L brake controller install kit which will adapt the 4 pole connector provided by the # 118727 to a 7-way.

For flat towing the Jeep, I'd begin with the # RM-521440-5 base plates which are compatible with all models except the SRT-8 and the Trackhawk model. If you have the SRT-8 or Trackhawk model, use the # BX1128
along with the # BX88151 adapter. For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain, part
# RM-522, which will self align and won't bind up on uneven terrain. For tow bar wiring, use the # RM-152-98146-7 diode kit.

For a supplemental braking system, I'd go with the Roadmaster Invisibrake, part # RM-8700. You'll also need the # RM-751449 stop lamp switch.

If the 19-3/4 inch installed height of the base plates has a height difference compared to the receiver on the motorhome greater than 3 inches, you'll also need a high/low adapter to bring it within that range. I'll link to our selection of adapters as well as to an article that explains how to choose the right adapter.

I've also linked to a whole slew of installation and product demonstration videos that you might find helpful.

expert reply by: Mike L

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 7

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 12

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Equipping a 2020 Jeep Grand Cherokee for Trailer and Flat Towing

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching