Recommended Hub For Reliable BT150A Axle
Question:
Good Morning. I am looking for a hub kit number that will be compatible with a Reliable BT150A axle/hub. I found Item # AKIHUB-545-2-1K, but wasnt sure it would fit. Thanks for helping out.
asked by: Andy
Expert Reply:
The Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-1K you were looking at may fit your Reliable BT150A axle, but based on my research it may use the # L44643 bearings like the # AKIHUB-545-2-1K, or may use # L44649 bearings.
The only way to be sure is to remove one of your current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your hubs use the # L44643 the # AKIHUB-545-2-1K would be correct.
If your hubs use the # L44649 the # AKIHUB-545-2-G-EZ-2K would be correct.
I included videos for each of the products mentioned for you to take a look at.
(click to enlarge)
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Availability of Axle that Works with 2,000 Pound Hubs with 1 Inch Bearings
- Outside Diameter of Idler Hub Center for Trailer Idler Hub Assembly # AKIHUB-545-2-1K
- Trailer Hub for Old Boat Trailer with 5 on 4-1/2 Bolt Pattern and a 1 Inch Straight Spindle
- Recommended Trailer Hub Assembly for Utility Trailer with Straight Spindle and L44643 Bearings
- Trailer Idler Hub for 2,000 Pound Axle and 13 Inch Tires
- Fitment of etrailer Trailer Idler Hub Assemblies AKIHUB-545-2-1K My Inner and Outer Bearings L44643
- Replacement Hubs for a 2010 Carry-On 2,000 Pound Trailer
- Locating Replacement Grease Seals for Old Calkins Trailer
- Trailer Hub Recommendation for Spindle with 1 inch Diameter
- Upgrading Oil Bath Hubs to Grease Hubs on a EZ Loader 14-17 1250 Trailer
- How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Replacement Hub Recommendation for Tracker Boat Trailer with Spindles that Measure 1.05 inch
- Trailer Hub Recommendation that Fits Spindle with 1 inch Bearing Diameter
- Will The AKIHUB-545-2-1K Hub Fit My SnowBear 5x8 Utility Trailer?
- Can Trailer Hub that Fit 8 inch Diameter Wheel also Fit 12 inch Diameter Wheel
- Wheel Stud Size on Trailer Hub # AKIHUB-545-2-1K
- Comparing etrailer/AxleTek Trailer Hubs for 2K Axles and 5 on 4-1/2 Bolt Patterns
- How to Determine if Trailer Can Switch to 5-Lug Hubs
- Bearing Buddy Recommendation for Trailer Idler Hub Assembly AKIHUB-545-2-1K
- Replacement Hubs for Aluma 8610T Snowmobile Trailer.
- How to Select Replacement 5-on-4-1/2 Boat Trailer Hub Using Bearing Parts Numbers
- Finding Correct Trailer Wheels to Match Hubs for a BT8 Spindle
- Replacement Hubs for Karavan 2004 Double PWC Trailer
- Do Harbor Freight Trailers with 5 Bolt Pattern Use Standard 5 Bolt Pattern