Which Spacers Will Work With Timbren Rear Suspension Enhancement System?

Question

Question:

I purchased the Timbren rear suspension enhancement system product # DR1500DQ for my 2015 Ram 1500 Big Horn. I need to know if the 1inch spacer for raised framed vehicles - 3/8inch bushing is the RIGHT Part to add on . I added 2 pictures..... Do these two parts work together to add extra length?

asked by: Wayne G

0

Expert Reply:

If you have a lift/level kit on your 2015 Ram 1500 then you can use spacers. If you do not have a lift or level kit installed on your truck then you do not need spacers as the Timbren Rear Suspension Enhancement System # TDR1500DQ is not supposed to make contact with your axle until sufficient weight is added to the truck.

With that being said, you can use Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing # A25723-90AH00 if you have 1" lift on your truck. You can also use Timbren 1/2" Spacer for Raised Frame Vehicles # TA25722-90P00 for 1/2" spacer. I attached a couple demonstration videos that you can check out.

expert reply by: Andrew N

0

Answer 1

The Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2007 Toyota Tacoma are designed so that there is more space between the spring and frame to allow the suspension to articulate freely when off-road. If you're looking for a…

view full answer...

Answer 2

To add a set a Timbrens to your 2022 Ford F-150 Tremor you will need the Timbren Rear Suspension Enhancement System item #TFR1504E. This system has a 6,000 lbs capacity and will help support your stock suspension system when towing. Since your Tremor…

view full answer...

Answer 3

The ideal gap between the bottom of the jounce bumper and top of the contact point is about 1/2"-1" but you can go more if you don't want them to engage as soon or as often. Therefore, in lifted applications you'll need to use…

view full answer...

Answer 4

I'm sorry to hear that your having issues with your trailer wiring, but I am more than happy to help track down the issue. Since you checked the relays and fuses and I assume they are all good, there is something else going on. I recommend that…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Which Spacers Will Work With Timbren Rear Suspension Enhancement System?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching