Inner Bearing to Brake Flange Dimension of # 84 Spindle TRU74FR
Question:
I saw the attached picture in the QandA. Could you pride the distance that I marked with the arrows? Going from the end of the thread may be a variable dimension, but the distance from the end of the inner bearing should be the same on all # 84 spindles. Thanks.
asked by: Scott F
0
Expert Reply:
The distance from the end of where the inner bearing sits to the brake mounting flange is 1-1/4 inches, as
shown in the provided photo. I've linked to a product description video for the spindle you inquired about.
Inner Bearing to Brake Flange Dimension for # TRU74FR Spindle
(click to enlarge)
(click to enlarge)
expert reply by: Mike L
0
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- How To Fill Dexter EZ-Lube Spindle/Hubs With Grease And How Often Should They Be Filled?
- Spindles and Hubs To Update 1972 Sanger Boat Trailer To Currently Used Sized Bearings
- Can Trailer Axle Spindle be Replaced
- Can Manual Adjust Brake Assemblies be Replaced with Self-Adjusting Assemblies?
- How to Determine Correct Replacement Trailer Hub and Spindle
- Replacement Spindle Options and Hubs for an Obsolete 1-3/8 Spindle
- Flange Bolt Pattern and Distance From Flange To Rear Of #84 E-Z Lube Spindle TRU74FR
- What Is The Distance From The Brake Mounting Flange To Tip Of Spindle On # 84 Spindle TRU74FR?
- How to Pick Out Hub/Bearings and Leaf Springs for 2003 Yacht Club Trailer
- Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Who Can Replace a Trailer Spindle
- Is The EZ Lube Spindle # TRU74FR Compatible With 10 Inch Brakes
- Can Oil Bath Trailer Hub Easily be Converted to Grease
- Replacement # 84 Spindle Recommendation to Replace a Trailer Spindle
- Replacing Spindle on Boat Trailer Using Digital Caliper
- Spindle Recommendation for a Square 2x2 Axle
- How to Pick Out Replacement Axle for Older Trailer
- Does EZ Lube Spindle # TRU74FR Have Brake Flange
- Replacement Spindle For a Lippert LCI35 Diamond Torsion Axle On a 2021 Forest River R-Pod 196
- How to Find Replacement Bearing Info For Older Trailer
- Availability Of A Trailer Hub With 1.25" And 0.75" Bearings
- Is it Normal for Grease to Leak Out of EZ Lube Grease Cap
- Can a Trailer Axle be Converted to an EZ Lube Axle by Replacing Spindles
- Replacing Obsolete Trailer Spindles With a 1-3/8" Straight Spindle With Current Size Spindles
- Grease Zerk Fitting Replacement vs. Spindle Replacement
- Replacement Grease Zerk for EZ Lube Spindle
- Spindles, Brakes and Hub/Drums For a 2-3/8", 3,500LB Axle