What Does Harness on 2017 Ford Explorer Look Like for Trailer Wiring

Question

Question:

Attached picure

asked by: Cedrick B

1

Helpful Expert Reply:

Your picture didnt make it through. Could you email it to me? I wonder if maybe you found wrong connector.

expert reply by: Jameson C

1

Customer Picture
(click to enlarge)

Install Picture
(click to enlarge)

Cedrick B.

4/1/2021

Attached picure

Reply

Jameson C.

4/1/2021

Thanks for your picture. If you check out the second picture attached you can see that what you have is a harness with a cap that gets removed and the # 118272 installs inline with it.

Reply

Answer 1

For trailer wiring you would want the part #118272 but then would want to swap in the 4 and 7-way connector part #HM40975 which will plug right in and give you both connectors. Check out the install video I attached that shows this installed on a…

view full answer...

Answer 2

The connectors you have found are not confirmed to be for the trailer wiring and we don't have any wiring harness that is a fit for what you described. Because you don't have the factory trailer wiring, I recommend starting with the T-One…

view full answer...

Answer 3

If your 2014 Ford E-350 Van came with a factory installed 7-Way trailer connector then all you would need is the brake controller and the wiring harness. The harness you referenced, #3034-P, is correct for your van and Tekonsha brake controllers such…

view full answer...

Answer 4

From the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero…

view full answer...

Answer 5

For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau and…

view full answer...

Answer 6

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 7

For your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will work by simply trimming the tracks as you mentioned. There…

view full answer...

Answer 8

For the channels you have on top of your 1999 Chevy Silverado the Rhino Rack Vortex Aero bars part #Y02-490B-NT would be a great option that comes with everything needed to install 59 inch aero shaped bars.

view full answer...

Answer 9

We have the Hopkins 4-way part #HM11140665 which is designed to fit the square connector you send in a picture of that would work well for you.

view full answer...

Answer 10

Unfortunately, we do not have a harness for your 2014 Ford E-350 that will plug into the connector in your photo. For a replacement you can hardwire in the #HM40975-11998 to install a 7-way connector. You can either cut off the connector you have and…

view full answer...

Answer 11

Per our records, you purchased the #118540 harness. I checked with my contact at Tekonsha, who tells me that it sounds as if you have the #118540 harness you purchased plugged into the wrong connector under the vehicle. There is a gray connector and…

view full answer...

Answer 12

If your 2017 Ford Explorer has one of the connectors for the #118272 you have the other as well and it would be just a matter of looking further for it. I attached an install video for this kit on a similar 2017 Ford Explorer for you to check out…

view full answer...

What Does Harness on 2017 Ford Explorer Look Like for Trailer Wiring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching