Correct Bearing Kit and Brake Shoes/Pads for Dexter 3,500 Lb Axle
Question:
Hi Can you recommend a bearing replacement kit for a dexter 3500lb ez lube..Looking for a kit and also replacement pads for the brakes Thanks
asked by: Alastair G
0
Expert Reply:
The correct bearing kit for a Dexter 3,500 Lb Axle is the Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal part # BK2-100. Then for the brake shoes, the best option we have would be the Electric Trailer Brake Kit part # AKEBRK-35-SA which would be just slightly more than the replacement shoes.
expert reply by:
Conner L
0
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Camper
- Car Hauler
- Utility Trailer
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Similar Expert Q&A Pages
- Replacement Bearings and Seals for Lippert 4,400 Lb Axle
- How to Find Replacement Bearings for 1999 Champion 193 Bass Boat Trailer
- How to Pick Out a Replacement Seal for a Surplus Military Axle
- How to Pick Out Grease Seal for Trailer with Bearing 68149
- Cause of Tire to Fender Gap Different Between Sides of Trailer
- How To Find Correct Replacement Bearings and Hub/Rotor for Mastercraft Trailer
- Bearing Kit Recommendation for L44649 Inner/Outer and Seal with 2 inch Outer Diameter
- Replacement Trailer Hub with 7/8 inch Outer Bearing on a Boat Trailer
- Replacement Wheel Bearings for an EZ Loader Boat Trailer
- Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
- Picking Out Bearings/Seal For EZ Loader Trailer
- Bearing Kit Recommendation for a Dexter 2800 lb Axle
- Replacement Bearing Kit and Bearing Buddy Protectors for #84 Spindle on Shoreland'r Trailer
- Grease Bearing Conversion Kit for Trailer with 4,000 lb Axles
- Picking Out New Hub/Drums and Brake Assemblies for Dexter 3,000 lb Axle
- How To Find Correct Replacement Bearings for Dutchmen Aspen Trail
- Bearing Kit for 2004 Ranger Boat Trailer
- Replacement Bearings and Grease Seal for Lippert 3,500 lb Axle for Jayco Trailer
- How Much Torque Is Needed To Pre-Load the Bearings On a Dexter Mobile Home Axle
- What Are the Bearing Pre-Load Requirements for a Mobile Home Axle
- Replacement Bearings for Lippert 4,400 lb Trailer Axle
- Info Needed to Determine Capacity of Axle to Pick Out Replacement Bearings
- Replacement Bearing Kit for Trailer Hub of Shoreland'r YAV2413SW
- Correct Bearings for LCI35 Lippert 3,000 Lb Trailer Axle
- Bearing Kit that Fits Lippert 4,400 lb Trailer Axle
- Replacing Bearing Seals on Older DICO Hub and Drum
- Can Bearing Kit BK2-100 be Used on Trailer that Had D-Washer on Spindle Nut
- How to Pick Out Bearings for AL KO Axle