Wall Thickness Recommendation for Square Tubing Support For Timbren Axle-Less Suspension

Question:

I have a 40x48inch trailer that I converted into a kayak hauler....what thickness on the 2inch square tubing should I use?

asked by: Jeff

Expert Reply:

If I were installing the Timbren Axle-Less Suspension System, # A12WS545, on my trailer, I would use a 2 inch steel tubing with a wall thickness of 1/4 inch. I spoke with my contact at Timbren and he told me that they do not have a minimum thickness that they require as long as it was a 2 inch steel square tube.

It is recommended that you add this tube if your trailer does not have a crossmember above the suspension and 1/4 inch is a common wall thickness for a 2 inch square axle.

expert reply by: John H