bing tracking image
Q & A Icon

Is Drilling or Modification Needed to Install a Trailer Hitch on a 2013 Nissan Altima Coupe

Question:

DO I NEED TO DRILL OR ENLARGE AND HOLES. I AM PUTTING ON A LEASE CAR AND NEED TO REMOVE WITHOUT AND MODIFICATIONS TO THE CAR

0

Expert Reply:

There is no drilling required to install the Draw-Tite trailer hitch # 24801 for the 2013 Nissan Altima Coupe. However, access holes will need to be enlarged in order to get the hardware in place. Since you are leasing the vehicle I do not recommend making modifications to the vehicle unless the dealer leasing the vehicle determines it is ok to do so. I have linked the instructions that you can show the dealer to help make that decision.

If you get the go ahead to install the trailer hitch then if you are planning on doing any towing you will also need a ball mount, and wiring # 118470. This is a T-connector so you will not have to splice into the vehicle wiring. I have linked the wiring instructions as well.

For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258.

expert reply by:
0

Products Referenced in This Question





Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Similar Expert Q&A Pages