Replacement Lock for ARE Truck Bed Cover/Topper

Question

Question:

Recently purchased a used ARE commercial topper, it was programmed to his truck key so no keys, looking to replace tumblers, in my topper, to set up so I can use my truck key. My topper is off of a 2016 Chevy. My truck is a 2008 gmc. It has the T handles and locks 3 places.

asked by: Jeremy W

0

Expert Reply:

I do have an option for you but we don't carry replacement parts for ARE toppers. Instead, what we can offer is a new electronic lock which will replace the manual lock, the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part # PAL9555.

expert reply by: Conner L

0

Answer 1

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes. If not you will need item #BL7022698.

view full answer...

Answer 2

I reached out to my contact at Pop & Lock and sent him along the picture you attached of the latch on your Leer camper shell. He said based on the image the Pop & Lock Power Locking Handle #PAL9555 should work perfectly. The only reason I use…

view full answer...

Answer 3

Yes, the Pop & Lock Power Lock Conversion Kit #PAL9772 that you referenced will fit your Jason hard tonneau cover!

view full answer...

Answer 4

As long as your vehicle has power door locks and your ARE V-Series truck cap has a frame-less, bonded glass door with a 1-1/8" center hole for a rotary latch you can use the Pop & Lock Power Locking Handle, part #PAL9555. There are a few…

view full answer...

Answer 5

The best option would be to use the NOCO Genius #329-GENIUS5, and charge the battery when shore power is available, or use the charger in conjunction with an inverter part #WC3720 when the truck is running. If you wanted to use the factory 7-way you…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Daren, for your 2024 Ford F-150 Raptor you are going to need: - A base plate kit, like the etrailer Invisible Base Plate Kit #e86YR, - A set of tow bars, like the etrailer XHD Non-Binding Tow Bar #e94ZR, - A braking system, like the Roadmaster…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Replacement Lock for ARE Truck Bed Cover/Topper

Product Page this Question was Asked From

Continue Researching