Replacement Trailer Hub Grease Seal for L44643 Inner and Outer Bearings
Question:
what seal do you have to replace a national 473426? My outer bearing is a Timken 44643
asked by: Dave
1
Helpful Expert Reply:
The seal you need is going to be more associated with the inner bearing and race. The outer bearing will help identify other parts but only if I have both bearing numbers. If both bearings are the same then the seal is # 34823 or for a pair use # RG06-010. You will need to pull the hub and get the inner bearing number as well to be sure.
These seals measure 1.249 inner diameter and 1.983 outer diameter.
helpful expert reply by: Michael H
1
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Double Lip Grease Seals (pair)
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Similar Expert Q&A Pages
- Replacement Bearing Kit With Bearings, Races, And Seals For 4 Lug Trailer Axle Hubs
- Tips on How to Pack Trailer Bearings with Grease
- Where to Find Bearing Part Numbers for EZ Loader Trailer
- How to Pick out a Replacement Seal for a Trailer Hub
- Bearing Kit for Boat Trailer with 1-1/16 Inch Diameter Straight Spindle
- How to Determine Replacement Bearings for a 2005 Fleetwood Yuma Pop Up Camper
- How to Determine Bearings and Seals that are Needed for a Long Chih Trailer with 12 Inch Wheels
- Wheel Bearings Needed for 1990 Coleman Newport Popup Camper
- How to Pick Out Spindle Washer for Trailer Hub
- How To Determine Bearings and Seals For Older Long Chih Trailer
- Replacement Grease Caps For Hub Bore 1.781 With Grease Zerk On Cap For Adding Grease To Spindle
- Grease Seals for Hub on Antique 1950's Trailer Using Military Surplus Axle
- How to Determine Correct Bearing Kit for 4X8 Trailer with 1 Inch Spindles
- Replacement Seal Needed for a Harbor Freight Haul-Master With Bearing 30205
- Replacement Bearings for 1986 Long Chih Trailer with 1000 lb Axle
- Recommended Grease To Use with Bearing Kit for BT8 Spindles
- Axle Capacity Rating For The L44643 Bearing
- Should There be a Space Between the Bearing and Seal on a Hub
- Needs Grease Seals of Approximately 1.22-Inch Inner Diameter for Home-Made Motorcycle Trailer
- Replacing Wheel Bearings and Seals Based On Diameter Or Number Stamped Into Bearing Face
- Dimensions Needed To Replace Bearings And Seals On Trailer
- Does Grease Seal in Trailer Hub Need to Press Against Bearings in Hub
- How to Select Replacement Grease Seals for Long Chih Trailer
- How to Determine the Correct Replacement Wheel Bearings for a 1990 Coleman Pop Up Camper
- Measuring a Spindle on a 1988 Long Chih Trailer LCI-851T to Determine the Correct Bearings
- Correct Bearing/Race and Castle Nut Kit for 1 Trailer Spindle
- Replacement Bearings for 2009 Rockwood Premier 2302 Trailer