Brake Controller Installation Parts Required for a 2020 Chrysler Voyager Without Factory 7-Way

Expert Reply:

To install the Curt Venturer Trailer Brake Controller # C51110 on your 2020 Chrysler Voyager you will need a Tekonsha T-One Vehicle Wiring Harness # 118712 to give you the light controls that you will need and an etrailer Universal Installation Kit for Trailer Brake Controller # ETBC7. I have included a video below of a brake controller installation on a 2018 Chrysler Pacifica so that you can see all the steps required for installation.

I would recommend that you upgrade your brake controller to a Tekonsha Prodigy P3 # 90195. This is a proportional brake controller that will not require constant adjustment as it has a inertia sensor that will adjust braking for light or severe conditions. It is also customizable on the LCD screen and will tell you of issues and where to start for diagnosing.

If you are still in need of a receiver I recommend the Draw-Tite Trailer Hitch Receiver # 36798. For attaching the hitch you will also need the Carbon Canister Relocation Kit # 76046SK.

expert reply by: Gregory M

0