Recommended Galvanized Hub W/ 5 on 4-1/2" Bolt Pattern For Timbren Axle-less Suspension ASR1THDS01  

According to CE Smith they use a Calcium Sulfonate grease on their hubs like the CE Smith Trailer Idler Hub Assembly #CE13515. This would require either the Tub #LOC64FR or Tube #LOC54FR of grease. While the color of this grease is tan it will still…

I reached out to CE Smith and found that they use Kendal grease on the CE Smith Trailer Hub Assembly #CE13511. The grease color they use is the red grease like #L11390, although they did say it is possible it may be tan but it is the same thing.

Yes, the CE Smith Trailer Idler Hub Assembly #CE13511 is compatible with the spindles on your Trailstar boat trailer since it uses the same bearings #L68149 and #L44649. It will fit your wheels with the 5-on-4-1/2 bolt pattern. This spare hub kit…

I have a solution for you, but the part #AKIHUB-545-35-K does not come with marine grade grease. Instead you would want the part #CE13511 as it is essentially the same spec hub in terms of bolt pattern and what spindle it fits except it does come…

According to Shorlandr, your SLR22L trailer uses hubs with a L44649 inner and outer bearing. The #CE13511 hub you mentioned uses a different inner bearing, so it won't work for you. The good news is that the #CE13311 is the correct hub, assuming…

The CE Smith Trailer Hub Assembly #CE13511 does use the same Inner Bearing #L68149 and Outer Bearing #L44649 as the ShoreLand'r Hub 4470400. This will work as a replacement for your ShoreLand'r model 2016 LUXR2314S7MH.

Yes, the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles #CE13511 is ready to be installed right out of the case. It is pre-greased which includes the bearings so there is no need to pack them when you first install the hub.

Harbor Freight trailers are unique. They don't have any industry standard parts on them, so replacement parts are very difficult to find. We don't have any grease caps that will fit your 2-inch hub. It may be possible to replace your hubs…

LMX red grease like the #L11390 is what the CE Smith Trailer Idler Hub Assembly #CE13515 typically comes with and is the best all-around grease for trailer hubs so it's what I recommend. This will also be compatible with non-red grease if you…

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

Bearing Buddy pumps grease into the center of the hub all the way back to the grease seal. A double lip seal should be used to prevent grease from blowing out the seal when added. When the hub and seals and bearings are first assembled, they should…

Before you added the new grease did you completely remove all of the old grease from everywhere? I bring it up because not all greases are compatible with each other and it can cause the grease to break down. It wouldn't happen over night but it…