Pre-Greased Hub/Drum for 3500 lb Spindles on 2018 R Pod 178 and Four Winns D0210S02 Trailer  

The Timbren Axle-Less systems are all universal, and since they bolt directly to the frame of the trailer can be used on any trailer including your 2019 Forest River R-Pod 179. Based on the information I can find on your R-Pod it appears that you are…

For a bearing kit that fits the 3,500 lb axle of your Forest River R-Pod 178 the correct part number is the part #BK2-100. This comes with bearings, races and a seal. I also attached an install video for this for you to check out as well.

The difference is found in the application. The Slipper Spring styles, like part #SP-179275, are intended for use with more heavy duty applications, while the Double Eye styles, like part #e77SR are used to provide a more comfortable ride. The part…

The Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long #TRFA73Z916DLNZ is a grade 5 bolt. Your setup as described is a standard setup for leaf spring hangers and double eye leaf springs. The #166081 is made by the same manufacturer…

A tapered spindle's compatible bearings will have different inner diameters. This is because the bearing seat locations will differ in terms of their diameter as the spindle goes out from the axle. A straight spindle will not have these tapered…

The bolt pattern of your existing hubs is likely to be 5-on-4-1/2 as this is a popular configuration, but there are actually four different 5-lug bolt patterns available in our replacement hub/drum products. You can refer to the linked article on…

Most trailer leaf springs will have a bushing in the eyes of the spring. It is interesting that the install video we have for the wet bolt part #126B2 that you referenced does not have a bushing involved at all. In reality all that really matters is…

The rear side of a Super Lube hub has a grease zerk fitting that works like the one on a Bearing Buddy grease cap such as #BB1781. These zerk fittings let you add wheel bearing grease to the hub interior without having to remove it from the spindle.…

The slipper spring should sit on the hanger bolt somewhere in the center of the flat part so that it allows a bit of movement as the suspension articulates. The curved ends will generally going to keep the spring from moving too far if the suspension…

The easiest way to determine the correct bearings for your trailer is to use the industry standard numbers stamped into the lip of the bearings. This would require removal of the hub. Your measurement, 1-1/16 inches, comes to 1.0625 inches and the…

You'd really need to base it off the hull design of the boat you plan to tow. I'd use swivel bunk brackets like the part #CE10000G-4 to mount the boards as these allow you to angle the boards to match the shape of your boat's hull. I…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.