Question:
I need a 15 foot version of this part. Need to replace the entire wiring harness. Do you have anything like that?
asked by: Steve L
Expert Reply:
Would a 20 foot harness work for you? If so, Wesbar offers a 20 foot version as part # 002220. This is not a wishbone style harness. You'll need to run the harness down one side to the taillight and then daisy chain over to the opposing taillight.
A wishbone style is also available as part # W002230. A wishbone style harness splits the running lamp circuit into two legs so you and run the left turn/brake lamp circuit and one running lamp circuit down the driver's side and the right turn/brake lamp circuit and the other running lamp circuit down the passenger side of the trailer.
I personally prefer the wishbone style, especially if you have running lamps along either side of the trailer.
You might also be interested in wire clips like # CE16867A which work great for securing the wire to the trailer.
I've linked to some install videos for both the harnesses I mentioned above.
Wesbar 4-Way Flat Trailer Wiring Harness - 20' Long
CE Smith Trailer Wiring Clips - Frame Mount - Zinc Plated Steel - Qty 10
4-Flat Connector Wishbone Style - Trailer End
Wesbar Wishbone Wiring Harness with 4-Pole Flat Trailer Connector - Trailer End - 18" Long