Are 3,500 lb AKEBRK-35-SA Electric Brakes From Husky
Question:
Gentlemen Is the AKEBRK-35-SA brake assembly the same as the Husky 32562-561 Brake assy... I noted that the Husky unit has a red wire which I have not seen before.. Thank you
asked by: Sandy S
0
Expert Reply:
The Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA are not Husky brakes, they are from AxleTek. While we don't offer Husky brakes so I'm not familiar with them, all electric brakes, including our AxleTek, have two wires, and either wire can be used for power or ground, it doesn't matter which.
With the # AKEBRK-35-SA, the only thing you will need for the install is the Mounting Hardware # BRKH10B.
I have added a link below to a video review for you to check out as well of the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA .
expert reply by: Kyle S
0
Products Referenced in This Question
Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Camper
- Car Hauler
- Utility Trailer
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Hardware Kit
- Redline
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Non-Brake Hub that Fits #84 Trailer Spindle
- Hub & Drum That Fits 2,200 lb Timbren Axle-Less System
- Replacement For Dexter 3,500 lb Hydraulic Brakes
- Correct 3,500 lb Hub & Drum For Boat Trailer With Bearings L44649 & L68149
- Brake Flange Bolt Hole Spacing of 3,500 lb Trailer Spindle TRU77FR
- What is the Diameter and Thread Pitch of the Mounting Hardware for 10" Brake Assemblies # BRKH10B?
- Will Self-Adjusting Electric Trailer Brakes Fit Dexter 3,500 lb Axles
- Replacement Brake Shoes For Dexter 10 Inch Nev-R-Adjust Electric Brakes & 3,500 lb Hub & Drum
- Torque Spec for Nuts that Attach 10 inch Trailer Brake Assemblies
- How to Determine What is Needed to Switch from Hydraulic to Electric Brakes
- Width of Hydraulic Brake Kit AKFBBRK-35-D
- Recommended Replacement Mounting Hardware for Dexter Electric Trailer Brakes
- Trailer Axle Option For M416 Trailer With & Without Electric Brakes
- Is Price of Dexter Nev-R-Adjust Electric Trailer Brake Kit 23-468-469 For Both Brakes
- 3,500 lb Hub & Drum And Electric Brakes For Boat Trailer
- Hub, Drum, and Bearings for 2016 Starcraft AR-ONE 18QB Travel Trailer With 3,500 lb Axle
- What is Included With 3,500 lb Self-Adujsting Electric Trailer Brake Kit
- Hub & Drum And Electric Brakes For 2,000 lb Timbren Axle-Less Suspension System
- Should Electric Brake Assemblies or Just Shoes Need to be Replaced
- Timbren Axle-Less System With Lift & Brakes for Little Guy Silver Shadow Trailer
- Are There 3,500 lb Capacity 10 x 2-1/4 Electric Trailer Brakes
- Brake Controller Recommendation for 2010 Mini Cooper Clubman With 7-Way
- Electric Brakes for 10 x 2-1/4 Drums on 3,500 lb Axle & How to Determine Correct Bearings
- Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Parts Needed to Add Brakes to 3,500 lb Trailer Axle
- Recommended Timbren Axle-Less System And Electric Trailer Brakes For M416 Trailer
- What All Do I Need To Add Electric Brakes To My Trailer With A Dexter 2,500 Pound Axle?
- Which Hubs/Drum Assembly and Brakes for Timbren Axle-Less Suspension 3500-lbs with 4 Lift