Do You Have Any Yakima Roof Tracks Available to Fir my Yakima Roof Rack?

Question

Question:

I have a Yakima tower, cross bar and bike rack system. I need to install this on my new 2009 hardtop Jeep Wrangler. I tried to order from etrailer.com the 54inch Yakima roof tracks that I also had on the shell of an old pickup, but although at first the order was to be shipped within a reasonable period of time, the order was updated to five months away. As a result, I cancelled the order. Do you have ANY Yakima roof tracks available or is there a substitute that is compatible with my Yakima towers?

asked by: Robert S

0

Expert Reply:

I have an alternate solution to the shipping time problem. I looked at the other sizes of Yakima rail systems, and they all will have about the same shipping time as the Yakima 54" Tracks for Roof Racks # RRRTV148 that you ordered.

With that being said, another solution is to purchase the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58" Long - Qty 2 # RRRTV148. However, this track is not compatible with your Yakima setup. If you choose to go this route, here is what you will need:

- Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 65" Long - Qty 2 # RRVA165S-2
- Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600
- Rubber Bases for Rhino-Rack RRRLT600 Quick Mount Legs - Qty 4 # RRQMFK06
- (optional) Rhino-Rack Backbone Roof Rack Mounting System - Jeep Wrangler Hard Top # RRRJKB2. Backbone system reinforces the structure of your Jeep's factory hard top so you can carry more weight on your roof rack. If you purchase the backbone, you will need two RLCP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Fixed Mounting Points - Qty 2 # RRVA-FK2.

expert reply by: Bob C

0

Answer 1

Yes, you will need to lower the headliner ideally to install the tracks of the Rhino-Rack Roof Rack System #Y02-480B on your Snugtop camper shell but it will work just fine. Once installed you would be able to reinstall the headliner.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the #Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

Hello Reyes; at this time (September 2024) there are no Rhino-Rack roof racks confirmed to fit your 2024 GMC Acadia AT4. The only roof racks we have that are confirmed to fit your raised rails are from Malone like the AirFlow2 #MAL74AR or #MPG215.

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Hi Sancho, Manufacturers haven't had a chance to test fit for the best sizing of their platforms for the 2024 Grand Highlander yet so you'll want to measure yourself to figure out how large of a platform will work for the roof and for your…

view full answer...

Answer 10

You were on the right track with the Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TH29200XT. The Leer 122 High Rise camper shell really isn't ideal for mounting a roof rack, because of the odd shape taking away probably 2 feet of…

view full answer...

Answer 11

For the Rhino-Rack cargo basket #RMCB02, the internal length is 53 inches. The width is 37-7/16 inches at the narrowest point. And the height is just under 5 inches. I have included a link to a video review of this basket for you.

view full answer...

Answer 12

For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts #Y05045, #Y53TR, #Y05042-2, #Y00242. This kit combines the Yakima Lock N Load…

view full answer...

Do You Have Any Yakima Roof Tracks Available to Fir my Yakima Roof Rack?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching