Can Demco Hijacker Autoslide 18K Be Converted To 21K?  

You currently have 2 options since your current Airborne Sidewinder pin box is not going to fit your new 2022 Vengeance Rogue toy hauler. We do have the new Sidewinder #RP34FR which has added the new bolt pattern for the Lippert Rhino pin box.…

The Demco part #DM6107 is the head and base for the Hijacker Autoslide with a 21k capacity. To attach this to a set of above bed fifth wheel rails you would need the part #DM6003. Then for a set of above bed rails that fits your 2012 Chevy Silverado…

You'd need to install the side bracket kit part #DM6003 on your Hijacker and then also use the rail kit adapter part #DM6333 which will convert the rail kit of your truck to a set of rails that the #DM6003 can fit.

The Demco #DM6107 only includes the hitch head and base assembly while the #DM8550035 is the entire hitch which also includes the side plates necessary to attach to industry standard bed rails such as those provided by the rail adapter for the puck…

Yes, you can remove the side brackets of your Demco Hijacker #DM8550034 and install the brackets part #DM49GV and the hitch will fit directly to the OEM pucks of your 2020 GMC Sierra 2500 short bed. This would allow you ability to not have to use the…

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…