Is there a Version of the HappiJac Manul to Electric Conversion without Wiring

Question

Question:

I have a 2021 Northstar 650SC that came from the factory with Happijac 4220s that were pre-wired for a later electrical conversion if I so chose to. It looks like the LC33960-182524 kit includes the wiring which I do not need. Is there a kit that just has the motors, the circuit board and remote control? Thanks.

asked by: Mike B

0

Expert Reply:

We do have the # LC733960-182524 without the wiring kit with jus the # LC733960. This is the motors, circuit board, and remote setup like you are looking for.

expert reply by: Jameson C

0

Answer 1

There are fuses on your circuit board for your HappiJac system. I recommend locating the circuit board and checking the fuses first. According to Lippert, if the fuses are not the problem you have a bad circuit board and will need to replace it with…

view full answer...

Answer 2

I reached out to my contact at Lippert, and she confirmed that you will be able to use the Clutchless motor head #LC759927 on your 4800 Happijack jack as a replacement for your current clutched motor head LC182515. However, you will need to have the…

view full answer...

Answer 3

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 4

Yes, the Replacement Motor Heads w Circuit Board and Remote #LC733960 will allow you to replace your 4800 electric motors and will give you a wireless remote to make controlling the jacks easier.

view full answer...

Answer 5

Based on the Happijac setup you have the correct electric upgrade kit you'd need is the #LC733960-182524.

view full answer...

Answer 6

The heads that come with the Replacement Motor Heads w Circuit Board and Remote #LC733960 measure 9-1/8" from the bolt hole that connects them to the legs up to the topmost part of the motor (see attached). Hopefully this will be enough…

view full answer...

Answer 7

Each of the motors of the Happijac Electric Truck Camper Jack System #LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

view full answer...

Answer 8

The Lippert Components High-Speed Power Stabilizer Jack part #LC298707 is a stabilizer jack and is not designed to lift therefore, does not have a lift capacity. It will be suitable for most camper trailers, travel trailers, 5th wheel trailers, and…

view full answer...

Answer 9

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Answer 10

The HappiJac 4200 are the manual jacks. We do have the upgrade kits available. The Replacement Motor Heads w Circuit Board and Remote for HappiJac Electric Truck Camper Jack Systems #LC733960 are compatible with the 4200 series if you are replacing…

view full answer...

Answer 11

It appears that your current jack motor is going to be obsolete. You will need to replace your jacks with one of the following HappiJac sets if you wish to still use electric motors. The HappiJac Electric Truck Camper Jack System #LC736515-ELKIT is…

view full answer...

Answer 12

The replacement motor kits that you are seeing will not work with the 4800 series jacks. The 4800 series, uses the 182522 motors and we do not carry them. The 4800 series was discontinued, making it more difficult to find replacement parts. With the…

view full answer...

Is there a Version of the HappiJac Manul to Electric Conversion without Wiring

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching