Are Curt C88KR Adapter Rails Compatible with PullRite 2700 Series 5th Wheel Hitch  

The Pullrite 4409 fifth wheel rail adapter is compatible with the Reese fifth wheel rail kit part #RP50066-58 that you referenced. The 4409 adapter is for adapting the traditional series Superglide hitches to fit industry standard fifth wheel rail…

The Adapter Rails #C88KR you are looking at does give you the same mounting pattern as the industry standard rails. As long as your Pull-Rite Superglide 5th wheel hitch fits those mounting points(see image below) you will be able to used this with…

From what I found the PullRite SuperGlide 2700 is one of the models that fits industry standard above the bed rails. Semi-custom installation kit #RP30035-426 does come with industry standard rails so it will fit the hitch and your 2013 Ford F-150…

When installing a fifth wheel hitch on a truck, the king pin will be centered over the rear axle or slightly forward of the rear axle. It will depend on the year, make, and model of vehicle and the size of the truck bed on where you will need to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…