Center Of Curt Gooseneck Hitch C60633 To Front Of Bed On 2020 Ram 2500 W/ 6-1/2' Bed  

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

Yes, we do! It is Curt Custom Underbed OEM-Style Gooseneck Hitch item #C60633. This gooseneck hitch is confirmed to fit both the 6-1/2' and 8' bed lengths of the new 2024 Ram 2500. It has a massive 35,000 lbs capacity and installs in…

According to Curt, the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch #C60633 measures 7.49" from the center of the ball to the U-bolts. The distance on center between the U-bolts is 15.03".

The crossmember for a gooseneck hitch is already pre-installed from the factory on a 2019 Ram 2500 so all you need is the center section, I recommend the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch part #C60633 which has the highest weight…

The Curt hitch gooseneck hitch #C60633 that you referenced is a confirmed fit for your 2016 Ram 2500 with a short bed and no OEM rail kit and also is compatible with your Andersen fifth wheel hitch Ultimate setup. While there does seem to be some…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

Thanks for the pictures and congrats on the new trailer! You are correct the Gen-Y item #GY98GR would be the correct adapter for your Jayco Eagle. This system replaces the Lippert Rhino pin box and has the extra pin weight capacity you will need. I…

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

A long double-towing set up like yours is always going to be susceptible to some sway, and while traveling slower will help, so will a form of sway control. Instead of a full-on weight distribution system - which your 5th wheel's hitch receiver…