Dexter D120 Axle Replacement Parts
Question:
I’m looking for info on some axles from dexter. It’s a Dexter Model P-12 SN# D3672740. Any info will help. The weight rating, bearing sizes also brake parts and general information.
asked by: Michael
0
Expert Reply:
Your Dexter D120 axle is rated for 11,999.80lbs, has a spring center measurement of 45.5" and track width of 74". It is an underslung axle that uses 3" wide 30" slipper springs rated at 6,000lbs each. The brakes are 12-1/4" x 5" electric brakes and the hub is an oil bath with 8 on 6.5" wheel bolt pattern. It was produced in March of 2000.
Electric Trailer Brake Kit # AKEBRK-12
Dexter Trailer Idler Hub Assembly # 8-214-8UC1
Inner Hub Bearing # 3984
Inner Race # 3920
Outer Hub Bearing # 28682
Outer Race # 28622
Oil Seal # 10-56
Replacement Oil Cap Kit # RG04-270
expert reply by: Gregory M
0
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 3.125 Inch I.D.
- 4.500 Inch O.D.
- Redline
more information >
Replacement Trailer Hub Bearing - 28682
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.250 Inch I.D.
- Bearing 28682
- Race 28622
- 12000 lbs Axle
- etrailer
more information >
Replacement Race for 3984 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 4.438 Inch O.D.
- Bearing 3984
- Race 3920
- 12000 lbs Axle
- 15000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 3984
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.625 Inch I.D.
- Bearing 3984
- Race 3920
- 12000 lbs Axle
- 15000 lbs Axle
- etrailer
more information >
Dexter Trailer Idler Hub Assembly for 12,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub
- Oil Bath
- 3984
- 28682
- For 12000 lbs Axles
- 5/8 Inch Stud
- 8 on 6-1/2 Inch
- Dexter Axle
more information >
Replacement Oil Cap Kit for 9,000-lb to 15,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.984 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Electric Trailer Brake Kit w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right Hand - 12K
- Trailer Brakes
- Electric Drum Brakes
- Camper
- Car Hauler
- Utility Trailer
- Self Adjust
- 12-1/4 x 5 Inch Drum
- 12000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Will etrailer.com Electric Brakes # AKEBRK-12 Replace Dexter 12K Brakes on Trailer
- Replacement Brake Assemblies for Trailer with Dexter 12k Axles
- Troubleshooting Electric Brakes Not Fully Engaging
- Recommended Brake Assemblies for Tandem Axle Trailer with 12K Axles
- Replacing 10K AL-KO 12-1/4 x 5 Inch Electric Brake Assemblies on Trailer
- Adjusting Electric Trailer Brakes
- Recommended Brake Upgrade For Horse Trailer w/ 7,000lb Axles
- Compatibility of etrailer Electric Brake Kit Wit 12,000LB Dexter Axles
- Replacement Brake Assemblies For 12,000LB Axle With 12-1/4" X 5" Electric Drum Brakes
- Are There Two Brake Assemblies in this Kit?
- Center Diameter of Electric Trailer Brake Kit w/ Dust Shields
- Electric Trailer Brakes for Trailer With 24,000 lb GVWR
- Converting Electric-Over-Hydraulic Brakes to Electric Brakes on Trailer
- Process to Convert Trailer from Air-Over-Hydraulic Brakes to Electric-Over-Hydraulic Brakes
- Converting Drum Brakes On A Dexter Military Trailer Axle With 8 On 6-1/2
- Troubleshooting Trailer with One Hub That Locks Up Even with Low Power on Brake Controller
- Parts Needed to Add Electric Brakes to Trailer With 12,000 Pound Air Brakes